- Have your fireplace inspected and cleaned annually by a National Chimney Sweep Guild Certified chimney sweep. A dirty fireplace can cause chimney fires or contribute to air pollution. Your local NCSG-certified chimney sweep will diagnose your fireplace and recommend what it needs in order to burn cleanly and safely.
- Choose the right fuel. In general, hardwood firewood (oak, madrone, hickory, ash, etc.) burns cleaner than softwood firewood (fir, pine, cedar, etc.). Independent tests (conducted by Shelton Research Labs, Santa Fe, NM) have proven that manufactured fire logs are much cleaner than firewood.
- Use seasoned wood, wood with a moisture content of less than 20 percent, burns much cleaner than green (high moisture content) wood. Check with your cordwood supplier to make sure that the wood you purchase is seasoned.
- Burn smartly. Good fireplace habits can decrease fuel consumption in the home while maintaining the same level of warmth. Make sure the fire gets enough air to burn properly. Close the damper when the fire is out to keep warm room air inside.
- Minimize creosote buildup which causes chimney fires. Creosote is the black tarry or flaky substance formed in chimneys during the wood burning process. While firewood leaves flammable creosote and carbon deposits on chimney wells, tests show fire-logs leave significantly less creosote accumulation than wood.
- Make a fire that fits your fireplace. A fire that’s too large or too hot not only wastes fuel, it can crack your chimney.
- Keep your fireplace in good working condition. If you notice any cracks in the chimney, and any loose mortar or brick, have your chimney repaired. Have the chimney liner inspected for cracking or deterioration.
- Read and follow the label when using fire-logs. Use one fire-log at a time. Don’t poke or break manufactured logs. This will cause them to crack apart, releasing their energy at a high rate and resulting in a shorter burn time. Fire-logs perform best when burned on a supporting fireplace expect will tell you that they are grate with a maximum of three to four inches of space between support bars.
- If your fireplace is equipped with glass doors, leave them open while burning a fire-log to allow proper draught and cleaner burning. Once you’re sure the fire is extinguished, close the damper and glass doors to retain warm air inside the house.
NO MATTER WHERE YOU ARE, KNOW WHERE THE FIRE EXTINGUISHERS ARE AND HOW TO USE THEM CORRECTLY SO THAT YOU WILL BE ABLE TO ACT QUICKLY.
Share This Article
Subscribe to our RSS Feed. What is RSS?